HPE6-A85 Aruba Certified Campus Access Associate Exam is a hot HPE certification test, which is required by most of HPE candidates. HPE6-A85 is a certification exam that tests your knowledge of Aruba's wired, wireless, security, and management technologies. The HPE6-A85 exam is designed for IT professionals who are responsible for configuring and managing Aruba networks. All the other HPE6-A85 exam information, objectives and real questions are your best guides to pass the test and earn ACA Campus Access Associate certification.
HPE6-A85 Aruba Certified Campus Access Associate Exam Overview
Aruba Certified HPE6-A85 exam information can help you understand the test first.
Aruba Certified HPE6-A85 Exam Objectives
Aruba Certified HPE6-A85 exam objectives cover the following details.
Network Stack 7%
Connectivity 10%
Network Resiliency and virtualization 8%
Switching 19%
WLAN 18%
Routing 9%
Security 9%
Authentication/Authorization 6%
Management and Monitoring 7%
Troubleshooting 4%
Performance Optimization 3%
Study Online Aruba Certified HPE6-A85 Real Questions
Online Aruba Certified HPE6-A85 real questions can help you study the above Aruba Certified Campus Access Associate HPE6-A85 exam objectives. Share some Aruba Certified HPE6-A85 real questions and answers below.
1.When using the OSPF dynamic routing protocol on an Aruba CX switch, what must match on the neighboring devices to exchange routes?
A. Hello timers
B. ECMP method
C. BDR configuration
D. DR configuration
Answer: A
2.What can be done to dynamically set the PoE Priority on a switch port when deploying IP cameras APs. and other PoE devices?
A. Enable Quick PoE on the switch modules
B. Configure PoE power management to Dynamic Mode
C. Enable profiling for device provisioning
D. Configure PoE power management to Class-based Mode
Answer: C
3.You are configuring a network with a stacked pair of 6300M switches used for distribution and layer 3 services. You create a new VLAN for users that will be used on multiple access stacks of CX6200 switches connected downstream of the distribution stack You will be creating multiple VLANs/subnets similar to this will be utilized in multiple access stacks What is the correct way to configure the routable interface for the subnet to be associated with this VLAN?
A. Create an SVl in the subnet on the 6300M stack, and assign the management address of each downstream switch stack to a different IP address in the same subnet
B. Create an SVl in the subnet on each downstream switch
C. Create a physically routed interface in the subnet on the 6300M stack for each downstream switch.
D. Create an SVl in the subnet on the 6300M stack.
Answer: D
4.Which feature can network administrators use to centralized RF planning and optimization service when using an Aruba mobility master architecture?
A. AirMatch
B. Client Wave
C. Airwave
D. Client Match
Answer: A
5.Which device configuration group types can a user define in Aruba Central during group creation? (Select two.)
A. ESP group
B. Ul group
C. Default group
D. Template group
E. Security group
Answer: C,D
